MEDICA 2026 | 16–19 November 2026 | Hall 6, Stall F37 | Düsseldorf, Germany
Certified single-use medical devices engineered for precise fluid delivery, clinical safety, and seamless integration into German hospital supply systems.
In high-complexity clinical environments—such as those operating across Hamburg’s tertiary hospitals, outpatient chemotherapy centers, and regional emergency services—achieving precise gravity-fed infusion control without relying on costly electronic volumetric pumps represents both a clinical imperative and a strategic economic advantage. The Dial Flow Regulator (frequently referred to in German clinical procurement guidelines as a Präzisions-Drop-Regler or Infusions-Feindosierer) serves as an essential bridge between basic roller-clamp gravity sets and computerized infusion pumps.
Engineered to maintain constant, reproducible volumetric delivery across extended infusion periods, precision dial flow regulators mitigate the systemic risk of uncontrolled fluid overload or under-dosing. As a premier global manufacturer and OEM exporter certified to ISO 13485:2016 and CE standards, Lars Medicare delivers medical-grade Dial Flow Regulators specifically calibrated to meet the stringent demands of Hamburg’s healthcare infrastructure and European Union Medical Device Regulation (EU MDR 2017/745) requirements.
Clinical Precision Standard: Our Dial Flow Regulators feature dual-scale calibrations ranging from 5 mL/h to 250 mL/h, engineered with micro-bore inner channels and medical-grade polycarbonate housing to prevent drift caused by ambient temperature fluctuations or fluid viscosity variation.
Our manufacturing methodology combines automated cleanroom injection moulding with rigorous hydrostatic testing to guarantee zero-leakage performance under normal gravitational pressure ranges (1.0 m to 1.2 m head height).
Laser-etched, tactile-feedback rotary wheel featuring clear numerical graduation marks from 5 to 250 mL/hr, allowing clinicians rapid, one-handed rate adjustment and instant visual verification.
Constructed from high-transparency, crack-resistant medical polycarbonate compatible with lipids, chemotherapy agents, and total parenteral nutrition (TPN) solutions without stress cracking.
Supplied with bio-compatible, kink-resistant PVC or TPU tubing compliant with ISO 10993 cytotoxicity standards, completely free of harmful phthalate plasticizers (DEHP-free).
Integrates elastomeric internal silicone seals that maintain tight volumetric tolerances over 24-to-72-hour continuous clinical operation, resisting cold-flow deformation.
Standardized male and female Luer lock fittings engineered according to ISO 80369-7 ensuring leak-proof, high-security connections with IV catheters, stopcocks, and extension lines.
Available with needleless Y-sites or self-sealing latex-free injection ports alongside fluid inline 1.2µ/0.2µ filters to eliminate particulate matter and air embolisms.
As Germany’s major northern medical hub and maritime gateway, Hamburg’s healthcare network demands medical disposables that fulfill specialized clinical protocols across various treatment environments:
In large-scale university hospitals like the University Medical Center Hamburg-Eppendorf (UKE), dial flow regulators are heavily deployed in step-down units, general surgical wards, and recovery rooms where constant intravenous hydration or antibiotic therapy is required without tying up expensive electronic infusion pumps.
Hamburg’s extensive network of day-clinics (Tageskliniken) in districts such as Altona, Eimsbüttel, and Wandsbek rely on dial flow regulators for outpatient chemotherapy regimens, pain management therapy, and iron infusions, enabling patient mobility while preserving precise infusion kinetics.
Due to Hamburg’s status as Europe’s third-largest container port, maritime medical suppliers and vessel emergency rooms stock our compact, battery-free dial flow regulators onboard commercial ships and offshore platforms where electrical supply reliability cannot be guaranteed during transit.
Procurement directors and medical device importers operating within Hamburg and the surrounding Metropolitan Region (Metropolregion Hamburg) face evolving regulatory and economic trends. Sourcing from an established manufacturer with robust E-E-A-T credentials provides distinct competitive advantages:
Regulatory Synergy with EU MDR 2017/745: All Lars Medicare Dial Flow Regulators are backed by comprehensive Technical Documentation (Class IIa under Rule 10/11), CE Certificate under EU Regulation 2017/745, and ISO 13485:2016 quality system audit reports, streamlining local registration with the German Institute for Medical Documentation and Information (BfArM).
The following data matrix illustrates why clinical procurement officers across Northern Germany are increasingly specifying Dial Flow Regulators over traditional gravity roller clamps and budget-heavy electronic pumps:
| Performance Feature | Standard Roller Clamp Gravity Set | Lars Medicare Dial Flow Regulator | Electronic Volumetric Pump |
|---|---|---|---|
| Flow Rate Control Range | Uncalibrated (Drop Counting Only) | 5 mL/h to 250 mL/h (Dual Scale) | 0.1 mL/h to 999 mL/h |
| Delivery Accuracy | ±25% to ±40% (High Drift) | ±5% to ±10% (Stable Control) | ±2% to ±5% |
| Capital Investment & Maintenance | Negligible / Single-Use | Low Unit Cost / Zero Maintenance | High Device Cost + Annual Calibration |
| Power Requirement | None (Gravity Dependent) | None (100% Mobile & Passive) | AC Power / Rechargeable Battery |
| Clinical Application | Basic Saline Hydration | Antibiotics, TPN, Pain Care, IV Meds | ICU Vasoactive Inotropic Infusions |
| Risk of Accidental Drift | High (Tubing Cold-Flow Risk) | Minimal (Regulated Gasket Lock) | Low (Software Guardrails) |
With more than two decades of dedicated medical disposable manufacturing experience, Lars Medicare operates an integrated, state-of-the-art facility located in Sonepat, India, complemented by international sales offices in New Delhi and Milton, Canada. Our supply chain infrastructure is custom-built to support European B2B importers, hospital tender winners, and private label distributors.
From internal tool design, high-precision injection moulding, and automated cleanroom assembly (Class 100,000 / ISO 8) to ethylene oxide (EO) sterilization, all operations are conducted under one roof to maintain total batch traceability.
Every production batch undergoes comprehensive quality control testing, including bubble-leak test, pressure hold test, tensile strength evaluation, sterility testing, and pyrogen/endotoxin testing in accordance with Ph. Eur. standards.
We offer complete private label branding options for German medical distributors, including customized blister packing, multilingual IFU printing (German, English, French, Spanish), UDI-compliant barcoding, and tailored carton packaging.
Every shipment of Dial Flow Regulators sent to Hamburg is accompanied by a full regulatory dossier, including the CE Certificate under EU MDR (or MDD transition provisions), ISO 13485:2016 Quality Management Certificate, EC Declaration of Conformity, Certificate of Analysis (CoA) per batch, EO Sterilization Validation Report, and Certificate of Free Sale (CFS).
Yes. We manufacture 100% DEHP-free, phthalate-free, and latex-free infusion sets specifically tailored for sensitive patient populations such as neonates, pediatrics, and oncology patients. Material safety data sheets (MSDS) and ISO 10993 biocompatibility reports are readily available upon request.
We offer flexible Incoterms including FOB, CIF Hamburg, and DDP (Delivered Duty Paid) to your warehouse location in Northern Germany. Standard lead times for containerized orders are typically 3 to 4 weeks for catalogue SKUs and 4 to 6 weeks for custom OEM private-label production programs.
Our regulator incorporates a precision-engineered micro-channel matrix encased in a rigid polycarbonate body. Unlike standard PVC tubing under roller clamps—which undergoes plastic creep and cold-flow deformation—our inner mechanism maintains constant geometry, resulting in flow rate stability (±5%) over 24-to-72-hour clinical runs.
For standard neutral blister packaging, our minimum order quantity starts at 10,000 units. For fully customized private-label brand packaging (featuring your company logo, customized German IFUs, and specific PZN / EAN barcoding), the MOQ is typically 30,000 units per SKU.
Absolutely. We routinely dispatch sample batches with complete technical datasheets and certificates of analysis to German hospital procurement boards and clinical engineering departments for bench testing and trial evaluations.
Elevate your medical supply portfolio with CE & ISO 13485 certified infusion devices engineered for precision, safety, and compliance with European clinical standards. Contact our export desk today for technical specifications, sample kits, and factory-direct quotation.
Contact Us
